山东安立泰泵业股份有限公司
电话:0537-3205528
营销总监:185-5370-1777
传真:0537-6258619
全国服务热线:400-618-3816
邮箱:jiningantai@163.com
地址:山东省济宁市鱼台经济开发区
Copyright @ 2019 山东安立泰泵业股份有限公司 版权所有 鲁ICP备14036540号-1 网站建设:中企动力 济南 后台管理
WQ(WQB) series submersible sewage pump
Product overview
WQ series submersible sewage pump is my company in the absorption of the advanced technology of famous German pump manufacturing company based on the research and development of products, its technology, high starting point, product in the hydraulic model and sealing technology, mechanical structure, protection control are reasonable and innovative design, the more secure, reliable, energy efficient, installation convenient and discharge performance is good. The whole series of products, type spectrum is reasonable, convenient selection.
Main use
Discharge of waste water from factories and businesses.
Residential sewage discharge.
Hospital, hotel sewage discharge.
Exploration and mining auxiliary.
Water supply and drainage of water plant.
Water supply and drainage system of urban sewage treatment plant.
Drainage of civil air defence system.
Municipal Engineering, construction site.
Rural biogas and farmland irrigation.
Conditions of use
1. supply voltage: voltage 380V, 660V, 1140V, three-phase, 50Hz.
2. transmission medium temperature: 0-40 C (more than the temperature and other hot water pump type).
3. transmission medium pH value: 5-9.
4. maximum dive depth: 20m.
Model significance
Structure characteristics
1 impeller and spiral case
Careful selection and matching of the impeller and the spiral case, so that the flow passage through the performance is good, high efficiency, with a full head without overload characteristics. Precise balance of impeller, small vibration, stable rotation.
2 Motor
Specially designed submersible motor, the protection level is IPX8, the stator winding insulation class is F level (155 degrees C), under normal temperature rise condition, the motor insulation life is prolonged.
The 3 seal
The motor shaft seal using two to three series mechanical seal, seal form reliable multi line. In the medium, the sealing surface increases with the increasing of the pressure of the medium, and effectively prevents water from entering the oil chamber. Another two in the oil chamber, to prevent oil into the motor, if the first failure, the other two can still prevent oil into the motor. Under normal usage, the trouble free running time is over 9000h.
4 oil room
In the oil chamber filled with suitable mechanical oil, the second mechanical seal is installed, the oil chamber is to prevent the media from the pump shaft into the motor of a barrier to prevent the media penetration into the motor, if the first mechanical seal leakage, by the oil chamber buffer medium can not directly into the motor, also on two independent mechanical seal friction surface lubrication and cooling, so that the machine seal is reliable.
5 bearing
Lower bearing motor pump shaft support reliable, sewage pump work according to the radial, axial force and fluctuating load, lower bearing can be by two to three sets of various different bearing types of bearing components, ensure the smooth operation of unit and longer life.
6 cable inlet seal
Cable with rubber sleeve and gland seal compression between the motor, and the motor cover to prevent the media from the cable interface into the motor cavity.
7 cooling water jacket
22 kW motor external set a cooling water jacket, with the conveying pump water to the motor for cooling, ensure electric pump at the lowest water level, still can normal operation.
8 pump safety protection
1) the motor stator winding is equipped with PT100 temperature sensor, the motor winding temperature monitoring, through the external special control device to protect the motor overheating.
2) oil indoor setting leakage sensor. When water enters the oil chamber to a certain degree, the sensor sends out the signal, and the external special control device is used for protecting the electric pump.
9 material
For the corrosive medium or strong corrosive containing solid particles of the medium, the abrasion resistance of high chromium cast iron, stainless steel and other materials.
Installation method
Mobile wet installation
Pump and hose or pipe connection, directly into the water, no fixed, convenient transfer to different sites.
Automatic coupling fixed wet type installation
The pump is connected with the drainage pipe automatically by the coupling device. Pump along the guide rod into the water and drainage pipeline automatic connection, when the pump is automatically loose, easy to install and remove.
Vertical fixed dry type installation
Pump vertical installed in the pool side of the clean pump pit, the staff can enter the pump pit for rapid repair of the pump. Even if the pump pit is submerged, the pump can still operate normally.
Horizontal fixed dry type installation
Pump horizontal installed in the pool side of the clean pump pit, the staff can enter the pump pit for rapid repair of the pump. Even if the pump pit is submerged, the pump can still operate normally.